USA electrical feedthroughs Keywords www.vacuum-guide.com

Mechanical feedthroughs Optical feedthroughs viewport bellows chambers vacuum components America Asia Pacific Europe
CND USA


Accratronics Seals Accratronics Seals Corp.
- 2211 Kenmere Avenue, Burbank, CA 91504, USA

email, Tel.

What began in 1964 is now an experienced and quality shop, taking its place in the future.
products: Electrical Feed Throughs

All of our seals are 100% hermetically sealed and capable of passing a helium leak rate of 1x10(-8).
Our seal products are made from 300 series stainless steel, Kovar, Inconel, Rodar and steel.
Our pins are made from 300 series stainless steel, Kovar, and iron nickel alloy (52 alloy).


ANCORP ANCORP
- 707 Southwest 19th Avenue, Williston, FL 32696, USA

email, Tel.

A&N Corporation is located in a 40,000 square foot, state-of-the-art manufacturing facility in Williston Florida. With 40 years of experience, A&N matches the unsurpassed quality of their vacuum components with a high level of customer service rarely seen in this industry. A&N specializes in the manufacturing, polishing, cleaning, packing, storage and shipping of high and ultra-high vacuum components. A&N produces the highest quality vacuum components for national laboratories, colleges and universities and original equipment manufacturers.
Products: Electrical Feedthroughs

A vacuum feedthrough facilitates the transfer of power, motion, fluids, or gases into a vacuum chamber from the outside. Vacuum feedthroughs are hermetically sealed to maintain your high vacuum or ultra-high vacuum environment when in use. ANCORP's selection of hermetic feedthroughs includes electrical feedthroughs, fluid and gas feedthroughs, rotary motion feedthroughs, and transition feedthroughs.

ANCORP's electrical feedthroughs are used to transfer low voltage, high current energy into a vacuum system to power deposition sources and other equipment. Available types include 400-amp high current feedthroughs and 1,000-amp water-cooled high current feedthroughs.


Apex Vacuum LLC - www.apexvacuum.com
- 233 Arnold Mill Road, Woodstock, GA 30188, USA

email, Tel.
products: Electrical Vacuum Feedthrough
  • Multi-Pin, Sub-Min C or Sub-Min D - Used for low power or instrumentation power applications
  • Power Feedthroughs - Used for transmitting power into the vacuum chamber system
  • Thermal Conductor Feedthroughs - Used to control temperature to a device inside the vacuum chamber
  • RF Power - Used for RF Power transmission
  • Coaxial Feedthroughs - BNC, MHV, SHV, MicroDot signals for instrumentation applications

belilove Belilove - www.belilove.com
- 21060 Corsair Blvd., Hayward, CA 94545, USA

email, Tel.

Sixty years of high-tech design experience in semiconductor equipment, medical equipment and R&D yields one of BCE's most innovative products.
products: Vacuum Feedthroughs

Heating Elements, and Custom Thermal Systems for Aerospace, University Research, Semiconductor, Medical and OEM Applications

BCE 550 Feedthrough, Threaded & Flanged, Circuit Board Mounted, Thermocouple Feedthrough, Fiber Optic Feedthrough, Multi Tube Feedthrough, D Sub Connector Feedthrough, Custom Bracket Feedthrough, Single Tube Feedthrough, 120V Socket Feedthrough, 9 Pin Vacuum Feedthrough, Replaceable Multi-TC Feedthru, Plug Feedthrough, 18 Wire Vacuum Feedthrough, 10x Replaceable Thermocouples, Heater/Sensor/Feedthru Combo


CERAMTEC CERAMTEC NORTH AMERICA - www.ceramtec-group.com
- One Technology Place, 29360 Laurens, USA

Jason Marlin, email, Tel.

The world leader in the manufacturing of ceramic-to-metal and glass-ceramic sealed electrical and optical components for the vacuum industry.
products: Standard and custom feedthrough solutions

for signal, high voltage and high current applications.
CeramTec's feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation. In addition to remaining leak-free in high and ultra-high vacuum, many of CeramTec's feedthroughs can accommodate: High temperatures, Cryogenic temperatures, High pressure, Aggressive chemicals.
CeramTec's high-frequency, high-reliability RF feedthroughs are engineered to perform efficiently in a variety of RF applications including sputtering, plasma generation, and induction heating. Our simple design brings the cooling water as close as possible to the seal at the conductor-insulator interface, eliminating the need for a complex cooling jacket.
CeramTec feedthroughs use only inorganic materials. The insulators are high-purity, high-strength, low-loss alumina ceramics. Metals include Kovar®, stainless steel, nickel, copper, nickel-iron alloys, cupro-nickel alloys, molybdenum, Alumel® and Constantan®. In corona-free designs, standard design practices consider electrical characteristics such as flashover, corona breakdown, creep, dielectric strength and puncture resistance.


Complete Hermetics Complete Hermetics - www.completehermetics.com
- 12630 Westminster Ave., Santa Ana, CA 92706, USA

email, Tel.

Complete Hermetics specializes in manufacturing customized hermetic seals and hermetic Feedthroughs covered from Hermetic Connectors, Electronic Packages to hermetic packages in California.
Defense, energy, aerospace, communications, transportation are some of the industries we are and have been providing products and services.
products: glass-to-metal, ceramic-to-metal, hermetic seals and feedthroughs


Conax Technologies Conax Technologies
- 2300 Walden Avenue, Buffalo, NY 14225, USA

email, Tel. +1.800.223.2389
products: Instrumentation Feedthroughs for the Furnace and Autoclave Industry

Conax Technologies sealed feedthroughs and compression seal fittings have proven to be the industry leaders in quality and performance. We are the originators of soft sealant technology that, when combined with mechanical compression, results in a remarkably secure seal on wires, probes, and electrodes passing through a pressure or environmental boundary.


Douglas Engineering electrical feedthrough Douglas Electrical Components, Inc. - www.douglaselectrical.com
- 5 Middlebury Blvd, Randolph, NJ 07869, USA

email, Tel.
products: Flange feedthroughs

Research facilities and industrial applications that require high vacuum sealed conductors using low outgassing materials have selected Douglas Electrical Components' flange feedthroughs for over 20 years as their only solution.
Standard vacuum flange feedthroughs seal up to 128 conductors, with several hundred foot lengths possible for custom designs. All types of shield conductors can be sealed directly, with multiple cables, studs, high voltage (up to 25KV) and fiber optics also available. Several customers have applied these seals in vacuum applications in to the 10E-10 torr range and beyond.


Fusite Division, Emerson Electric CO. -
- 6000 Fernview Ave, Cincinnati, OH 45212, USA

email, Tel.
products: glass-to-metal hermetic seals, connectors and feedthroughs

When an application demands a robust electrical or signal connection to bridge an inert atmosphere or vacuum on one side and a high-pressure, high-temperature or corrosive condition on the other, Fusite hermetic solutions have helped our customers achieve mission success for more than 75 years.


Lesker Vacuum feedthroughs Kurt J Lesker Company
- 1515 Worthington Avenue, Clairton, PA 15025, USA

email, Tel.

The Kurt J. Lesker Co. was founded in 1954 as a manufacturers' representative for vacuum products in Pittsburgh PA, USA. Today, we are an international manufacturer and distributor of vacuum components and vacuum systems for research and industrial applications.
products: Electrical Feedthroughs

Our Electrical Feedthroughs cover four distinct product groups:
Power Feedthroughs, Signal Feedthroughs, Themocouple Feedthroughs, Ceramic Breaks
We make over 1,200 different electrical feedthroughs in a wide variety of terminations, maximum voltages, and current carrying capacities.


MPF Vacuum feedthroughs MPF Products Inc. - www.mpfpi.com
- 3046 Bramlett Church Road., Gray Court SC 29645, USA

email, Tel.

MPF Products Inc. specializes in designing and manufacturing products utilizing ceramic-to-metal sealing technology.
products: Ultra High Vacuum Feedthroughs

and Optical Viewports.

Standard products include Multipin Connectors, Power Feedthroughs, Coaxial Connectors, Thermocouples Isolators, Breaks, Envelopes, Viewports, Connectors, Wires, Insulators & Accessories for vacuum and atmosphere.


Omega Engineering Inc. - www.omega.com
- 800 Connecticut Ave. Suite 5N01, Norwalk, Connecticut 06854, USA

email, Tel.
products: Vacuum & Pressure NPT Feedthroughs for Sealing Wire & Cable


OMLEY INDUSTRIES OMLEY INDUSTRIES, INC. - www.omley.com
- 150 Corporate Way, Grants Pass, OR 97526, USA

email, Tel.

Since 1963, Omley has been involved in custom vacuum brazing, meeting the special requirements of our many customers. These requirements include applications for high-temperature, high-voltage, high pressure, aerospace, high-energy physics, medical technology, super conductivity, ultra-high vacuum, cryogenics, lasers and numerous others.
products: High vacuum feedthroughs

Omley Industries, Inc. has pioneered many applications using the active alloy brazing process. When quick delivery is required, the active alloy process has proven to be cost effective. Omley also uses a variety of metallizing processes completing the full range of ceramic to metal brazing services
Omley has capabilities for brazing or welding Metal to Metal assemblies with like or dissimilar metals. Our customers prefer brazing for its many advantages, such as cosmetic appearance, cleanliness, baked-out surfaces. Brazing also eliminates oxidation, outgassing, and virtual leak areas that are common with welding. The surprising aspect of brazing is its low cost. In most cases, it is very competitive with welding.


PAVE Technology Hermetic Electrical PAVE Technology Co - www.pavetechnology.com
- 2751 Thunderhawk Court, Dayton, OH 45414, United States

email, Tel.

PAVE Technology Co was founded in 1980. Its wire and connector hermetic seals are used in a very wide range of industries for low or high pressures or vacuums requiring helium gas tight seals or IP67 to IP69 seals. PAVE products feed through a sealed bulkhead either electrical or fiber optic signals without any detectable leakage of gases or fluids. This complete leak tightness performance includes ends of any insulated, shielded or stranded copper conductor wire, cable and/or pins.
products: wire and connector hermetic seals

PAVE hermetic seals are any type of insulated, stranded or solid plated copper conductors in any combination or lengths, copper or brass connector pin contacts or glass fiber optic cables of any type, all sealed for low or high pressures or vacuums, helium gas tight, moisture tight bulkhead seals available in unlimited wide range of combinations that can be easily customized for cost effective small or large quantities. Wire connector terminations can also be included for a complete, ready to use hermetically sealed thru-bulkhead wire connector harness.


Pfeiffer Vacuum Feedthroughs Pfeiffer Vacuum Inc. -
- 24 Trafalgar Square, Nashua NH 03063-1988, USA

email, Tel.

Our comprehensive range of solutions, products and services includes vacuum pumps, measurement and analysis equipment, up to complex vacuum systems.
products: Feedthrough

It is often necessary to transfer electrical currents, signals, fluids or mechanical movements into a vacuum through vacuum-sealed feedthroughs.

Pfeiffer Vacuum offers you a diverse selection of vacuum feedthroughs for electrical currents, voltages, thermocouples and fluids in all flange lines for high vacuum and ultra-high vacuum applications.


RHSeals, LLC. - www.rhseals.com
- 4156 Dayton Xenia Rd. Beavercreek, OH 45432, USA

email, Tel.
products: Reliable Hermetic Seals

RHSeals is proud to be a leader in the production of custom hermetic seals through innovation, quality, and customer service. We provide custom hermetic seals to these industries: Aerospace, Automotive, Military, Medical, Refrigeration Compressors, Oil & Gas, Marine, and Chemical.


feedthroughs and connectors SOLID SEALING TECHNOLOGY - www.solidsealing.com
- 44 Dalliba Ave, Watervliet NY 12189, USA

Amy LeBlanc, email: aleblanc@solidsealing.com, Tel. +1 518-874-3600

At Solid Sealing Technology, we utilize the latest equipment and processes to join advanced materials including: metalizing of ceramics, high temperature brazing, glass-ceramic sealing, welding, and critical mechanical assembly.
Whether you are a distributor looking for industry standard feedthroughs and connectors, or an O.E.M. that requires a custom assembly, SST takes pride in engineering and manufacturing to your specific needs.
products: Vacuum feedthroughs and connectors
  • High voltage bushings, Sapphire, Quartz, and extended range viewports, X-Ray Tubes
  • Vacuum Breaks and multi-layer stacks, Thermocouple feedthroughs
  • Coaxial connectors, Beamline feedthroughs and injector tubes
  • Small vacuum vessels and hermetic packages, Metalized ceramics
  • Specialty metal to metal brazed assemblies


Spectite feedthrough TC Measurement & Control Inc - www.spectite.com
- Hillside, IL 60162, USA

email, Tel.
Products: Spectite Feedthrough
  • Series PF - Feedthroughs for single elements: are designed for sealing single elements, usually sensors, probes or tubes, where they penetrate a pressure or environmental boundary. Common applications include sealing sheathed thermocouples and resistance thermometers, small-bore tubes and other types of sensor where they enter a process enclosure...
  • Series MF - Feedthroughs for multiple elements: A single access port into an enclosure or process vessel is all that is needed to allow multiple probes, sensors, etc., to pass through an environmental or pressure boundary using a single feedthrough assembly...
  • Series PSF and MSF - For single and multiple elements: similar to series MF feedthroughs, but have split internal components...
  • Series WF - For multiple wires & probes: When multiple wires must pass through a pressure boundary, series WF feedthroughs can provide an efficient seal without recourse to epoxies or other non-adjustable fixture methods...
  • Series EF - high voltage/current electrode: The integral electrode mounted in these feedthroughs enables specifiers to provide high-voltage, high-current supplies in process enclosures, autoclaves, vacuum furnaces and reactor vessels to power heaters, electric motors & other devices needing high power supply...
  • Series HF - High density, insulated wire, sealed tube assemblies: A Teflon-lined, stainless steel tube is swaged over multiple, insulated, single-core copper and/or thermocouple-material wires to make a continuous wire, high-density, sealed feedthrough tube...


Vacuum Products Feedthrough Vacuum Products Corporation - www.vacproducts.com
- 4841 Davenport Pl, Fremont, CA 94538, USA

email, Tel.
products: Vacuum feedthrough

electrical feedthrough, power feedthrough
coaxial cable
thermal couple
multi-pin feedthrough
ceramic break, liquid break
connector and cable


Winchester Interconnect. - www.winconn.com
- 68 Water Street, Norwalk, Connecticut 06854, USA

email, Tel.

Winchester makes a variety of assemblies for your vacuum applications. From Vacuum flanges to custom headers, our machine shop and vast tooling allows us to design and build the best solution for you.
products: Sealed with Ceramax®

All Winchester Interconnect hermetic multi-pin connectors utilize exclusive Ceramax® dielectric compound in conjunction with BeCu contacts to create a best-in-class hermetic seal. Ceramax® is impervious to crack propagation, which is the #1 failure mode of conventional glass seals and lesser ceramics.
Tekna Seal products, like Lithium Battery Feedthrough Seals, are now sold under the Win™ brand from Winchester Interconnect™.

 

 

top of page